Porphyry Cu systems host some of the most widely distributed mineralization types at convergent plate boundaries, including porphyry deposits centered on intrusions; skarn, carbonate-replacement, and sediment-hosted Au deposits in increasingly peripheral locations; and superjacent high-and intermediate-sulfidation epi-thermal deposits. The systems commonly define linear belts, some many hundreds of kilometers long, as well as occurring less commonly in apparent isolation. The systems are closely related to underlying composite plutons, at paleodepths of 5 to 15 km, which represent the supply chambers for the magmas and fluids that formed the vertically elongate (>3 km) stocks or dike swarms and associated mineralization. The plutons may erupt volcanic rocks, but generally prior to initiation of the systems. Commonly, several discrete stocks are emplaced in and above the pluton roof zones, resulting in either clusters or structurally controlled alignments of porphyry Cu systems. The rheology and composition of the host rocks may strongly influence the size, grade, and type of mineralization generated in porphyry Cu systems. Individual systems have life spans of ~100,000 to several million years, whereas deposit clusters or alignments as well as entire belts may remain active for 10 m.y. or longer. The alteration and mineralization in porphyry Cu systems, occupying many cubic kilometers of rock, are zoned outward from the stocks or dike swarms, which typically comprise several generations of intermediate to felsic porphyry intrusions. Porphyry Cu ± Au ± Mo deposits are centered on the intrusions, whereas car-bonate wall rocks commonly host proximal Cu-Au skarns, less common distal Zn-Pb and/or Au skarns, and, beyond the skarn front, carbonate-replacement Cu and/or Zn-Pb-Ag ± Au deposits, and/or sediment-hosted (distal-disseminated) Au deposits. Peripheral mineralization is less conspicuous in noncarbonate wall rocks but may include base metal-or Au-bearing veins and mantos. High-sulfidation epithermal deposits may occur in lithocaps above porphyry Cu deposits, where massive sulfide lodes tend to develop in deeper feeder structures and Au ± Ag-rich, disseminated deposits within the uppermost 500 m or so. Less commonly, intermediate-sulfidation epithermal mineralization, chiefly veins, may develop on the peripheries of the lithocaps. The alteration-mineralization in the porphyry Cu deposits is zoned upward from barren, early sodic-calcic through potentially ore-grade potassic, chlorite-sericite, and sericitic, to advanced argillic, the last of these constituting the lithocaps, which may attain >1 km in thickness if unaffected by significant erosion. Low sulfidation-state chalcopyrite ± bornite assemblages are characteristic of potassic zones, whereas higher sulfidation-state sul-fides are generated progressively upward in concert with temperature decline and the concomitant greater degrees of hydrolytic alteration, culminating in pyrite ± enargite ± covellite in the shallow parts of the litho-caps. The porphyry Cu mineralization occurs in a distinctive sequence of quartz-bearing veinlets as well as in disseminated form in the altered rock between them. Magmatic-hydrothermal breccias may form during por-phyry intrusion, with some of them containing high-grade mineralization because of their intrinsic permeabil-ity. In contrast, most phreatomagmatic breccias, constituting maar-diatreme systems, are poorly mineralized at both the porphyry Cu and lithocap levels, mainly because many of them formed late in the evolution of systems. Porphyry Cu systems are initiated by injection of oxidized magma saturated with Sand metal-rich, aqueous fluids from cupolas on the tops of the subjacent parental plutons. The sequence of alteration-mineralization events charted above is principally a consequence of progressive rock and fluid cooling, from >700° to <250°C, caused by solidification of the underlying parental plutons and downward propagation of the lithostatic-hydrostatic transition. Once the plutonic magmas stagnate, the high-temperature, generally two-phase hyper-saline liquid and vapor responsible for the potassic alteration and contained mineralization at depth and early overlying advanced argillic alteration, respectively, gives way, at <350°C, to a single-phase, low-to moderate-salinity liquid that causes the sericite-chlorite and sericitic alteration and associated mineralization. This same liquid also causes mineralization of the peripheral parts of systems, including the overlying lithocaps. The progressive thermal decline of the systems combined with synmineral paleosurface degradation results in the characteristic overprinting (telescoping) and partial to total reconstitution of older by younger alteration-mineral-ization types. Meteoric water is not required for formation of this alteration-mineralization sequence although its late ingress is commonplace. Many features of porphyry Cu systems at all scales need to be taken into account during planning and execution of base and precious metal exploration programs in magmatic arc settings. At the regional and district scales, the occurrence of many deposits in belts, within which clusters and alignments are prominent, is a powerful exploration concept once one or more systems are known. At the deposit scale, particularly in the por-phyry Cu environment, early-formed features commonly, but by no means always, give rise to the best ore-bodies. Late-stage alteration overprints may cause partial depletion or complete removal of Cu and Au, but metal concentration may also result. Recognition of single ore deposit types, whether economic or not, in por-phyry Cu systems may be directly employed in combination with alteration and metal zoning concepts to †

Porphyry Cu systems host some of the most widely distributed mineralization types at convergent plate boundaries, including porphyry deposits centered on intrusions; skarn, carbonate-replacement, and sedimenthosted Au deposits in increasingly peripheral locations; and superjacent high-and intermediate-sulfidation epithermal deposits. The systems commonly define linear belts, some many hundreds of kilometers long, as well as occurring less commonly in apparent isolation. The systems are closely related to underlying composite plutons, at paleodepths of 5 to 15 km, which represent the supply chambers for the magmas and fluids that formed the vertically elongate (>3 km) stocks or dike swarms and associated mineralization. The plutons may erupt volcanic rocks, but generally prior to initiation of the systems. Commonly, several discrete stocks are emplaced in and above the pluton roof zones, resulting in either clusters or structurally controlled alignments of porphyry Cu systems. The rheology and composition of the host rocks may strongly influence the size, grade, and type of mineralization generated in porphyry Cu systems. Individual systems have life spans of ~100,000 to several million years, whereas deposit clusters or alignments as well as entire belts may remain active for 10 m.y. or longer. The alteration and mineralization in porphyry Cu systems, occupying many cubic kilometers of rock, are zoned outward from the stocks or dike swarms, which typically comprise several generations of intermediate to felsic porphyry intrusions. Porphyry Cu ± Au ± Mo deposits are centered on the intrusions, whereas carbonate wall rocks commonly host proximal Cu-Au skarns, less common distal Zn-Pb and/or Au skarns, and, beyond the skarn front, carbonate-replacement Cu and/or Zn-Pb-Ag ± Au deposits, and/or sediment-hosted (distal-disseminated) Au deposits. Peripheral mineralization is less conspicuous in noncarbonate wall rocks but may include base metal-or Au-bearing veins and mantos. High-sulfidation epithermal deposits may occur in lithocaps above porphyry Cu deposits, where massive sulfide lodes tend to develop in deeper feeder structures and Au ± Ag-rich, disseminated deposits within the uppermost 500 m or so. Less commonly, intermediatesulfidation epithermal mineralization, chiefly veins, may develop on the peripheries of the lithocaps. The alteration-mineralization in the porphyry Cu deposits is zoned upward from barren, early sodic-calcic through potentially ore-grade potassic, chlorite-sericite, and sericitic, to advanced argillic, the last of these constituting the lithocaps, which may attain >1 km in thickness if unaffected by significant erosion. Low sulfidation-state chalcopyrite ± bornite assemblages are characteristic of potassic zones, whereas higher sulfidation-state sulfides are generated progressively upward in concert with temperature decline and the concomitant greater degrees of hydrolytic alteration, culminating in pyrite ± enargite ± covellite in the shallow parts of the lithocaps. The porphyry Cu mineralization occurs in a distinctive sequence of quartz-bearing veinlets as well as in disseminated form in the altered rock between them. Magmatic-hydrothermal breccias may form during porphyry intrusion, with some of them containing high-grade mineralization because of their intrinsic permeability. In contrast, most phreatomagmatic breccias, constituting maar-diatreme systems, are poorly mineralized at both the porphyry Cu and lithocap levels, mainly because many of them formed late in the evolution of systems. Porphyry Cu systems are initiated by injection of oxidized magma saturated with Sand metal-rich, aqueous fluids from cupolas on the tops of the subjacent parental plutons. The sequence of alteration-mineralization events charted above is principally a consequence of progressive rock and fluid cooling, from >700° to <250°C, caused by solidification of the underlying parental plutons and downward propagation of the lithostatichydrostatic transition. Once the plutonic magmas stagnate, the high-temperature, generally two-phase hypersaline liquid and vapor responsible for the potassic alteration and contained mineralization at depth and early overlying advanced argillic alteration, respectively, gives way, at <350°C, to a single-phase, low-to moderatesalinity liquid that causes the sericite-chlorite and sericitic alteration and associated mineralization. This same liquid also causes mineralization of the peripheral parts of systems, including the overlying lithocaps. The progressive thermal decline of the systems combined with synmineral paleosurface degradation results in the characteristic overprinting (telescoping) and partial to total reconstitution of older by younger alteration-mineralization types. Meteoric water is not required for formation of this alteration-mineralization sequence although its late ingress is commonplace. Many features of porphyry Cu systems at all scales need to be taken into account during planning and execution of base and precious metal exploration programs in magmatic arc settings. At the regional and district scales, the occurrence of many deposits in belts, within which clusters and alignments are prominent, is a powerful exploration concept once one or more systems are known. At the deposit scale, particularly in the porphyry Cu environment, early-formed features commonly, but by no means always, give rise to the best orebodies. Late-stage alteration overprints may cause partial depletion or complete removal of Cu and Au, but metal concentration may also result. Recognition of single ore deposit types, whether economic or not, in porphyry Cu systems may be directly employed in combination with alteration and metal zoning concepts to

The formation of porphyry Cu deposits in calc-alkaline magmatic arcs is considered to be the cumulative product of a wide range of processes beginning with dehydration of the subducting oceanic slab. No single process is key to the formation of large deposits, but the absence or inefficient operation of any contributory process, or the action of a deleterious process, can stunt or prevent deposit formation.

The Alteration and Mineralization Characteristics of Miocene Porphyry Cu-Au Deposits of Chagai Magmatic Belt, District Chagai, Balochistan, Pakistan, 2021

Subduction related Miocene porphyry type deposits are found in the east-west trending Chagai magmatic belt (CMB) in Pakistan's western margin, Balochistan. This arc exists on the west segment of the Tethyan metallogenic belt in the southwest of Pakistan. Tethyan metallogenic belt is widely spread over 12,000 km from east to west direction from Indochina, Tibet, Pakistan, Iran, Turkey and Alpine mountain range in Europe. During the last thirty to forty years several porphyry deposits have been reported in the Chagai magmatic arc, including the very large Reko Diq H14-H15, large Saindak, Tanjeel, H35, H8 and medium Dasht-e-Kain porphyry deposits and many small porphyry copper deposits. These porphyry deposits were developed within the phase of calc-alkaline type magmatism in the Chagai arc. Tonalite, quartz diorite, and monzonite host the porphyry deposits within the adjacent sedimentary wall rock units of Sinjrani Volcanic Group, Juzzak, Saindak, and Amalaf Formations. The concentric zonal pattern of hydrothermal alteration in these porphyry deposits of the Chagai magmatic arc follows the world's major porphyry deposits' alteration pattern. Zones of hydrothermal alteration from distal to proximal part includes a potassic alteration, sericitic-clay-chlorite alteration, sericitic alteration, argillic alteration and propylitic alteration. Major ore mineralization in these deposits is of copper, gold, silver, molybdenum, and minor constituents of other base metals that have been reported to occur within hydrothermal alteration zones in the Miocene porphyry Chagai magmatic arc.

Economic Geology, 2010

The Bingham Canyon porphyry copper-gold-molybdenum deposit is one of the largest and highest-grade porphyry orebodies in the world. This study focused on the northwest side of the deposit where quartz monzonite porphyry (QMP), the first and largest porphyry intrusion, hosts the bulk of the high-grade copper-gold ore (>1.0% Cu, >1.0 ppm Au). The north-northeast-trending, high-grade zone had pre-mining dimensions of 1,500 m strike, >300 m vertical, and 500 m width and contained more than 500 million tonnes (Mt) of ore associated with potassic alteration and abundant quartz veins. The lack of superimposed sericitic alteration yielded ideal exposures in which to study the early, high-temperature stages of ore formation, a style of mineralization that in many porphyry deposits represents the major period of copper introduction.

Porphyry copper deposits result from the complex interactions and feedbacks of many processes. Owing to the complexity, a succinct definition that includes the essential attributes of this deposit class is elusive. Consequently, this descriptive model uses a working definition of a porphyry copper deposit. A porphyry copper deposit is 1. One wherein copper-bearing sulfides are localized in a network of fracture-controlled stockwork veinlets and as disseminated grains in the adjacent altered rock matrix; 2. Alteration and ore mineralization at 1-4 km depth are genetically related to magma reservoirs emplaced into the shallow crust (6-8+ km), predominantly intermediate to silicic in composition, in magmatic arcs above subduction zones; 3. Intrusive rock complexes that are emplaced immediately before porphyry deposit formation and that host the deposits are predominantly in the form of upright vertical cylindrical stocks and/or complexes of dikes; 4. Zones of phyllic-argillic and marginal propylitic alteration overlapping and surrounding a potassic alteration assemblage; and, 5. Copper may also be introduced during overprinting phyllic-argillic alteration events.

Mineralium Deposita, 2005

El Galeno and Michiquillay are early to middle Miocene Cu-Au-Mo porphyry-related deposits located in the auriferous Cajamarca district of northern Peru. The El Galeno deposit (486 Mt at 0.57% Cu, 0.14 g/t Au and 150 ppm Mo) is associated with multiple dioritic intrusions hosted within Lower Cretaceous quartzites and shales. Emplacement of the porphyry stocks (17.5-16.5 Ma) in a hanging wall anticline was structurally controlled by oblique faults superimposed on early WNW-trending fold-thrust structures. Early K-feldspar-biotite-magnetite (potassic) alteration was associated with pyrite and chalcopyrite mineralisation. A quartz-magnetite assemblage that occurs at depth has completely replaced potassically altered rocks. Late-and post-mineralisation stocks are spatially and temporally related to weak quartz-muscovite (phyllic) alteration. High Au grades are associated with early intrusive phases located near the centre of the deposit. Highest Cu grades ($0.9% Cu) are mostly associated with a supergene enrichment blanket, whilst high Mo grades are restricted to contacts with the metasedimentary rocks. The Michiquillay Cu-Au-Mo deposit (631 Mt at 0.69% Cu, 0.15 g/t Au, 100-200 ppm Mo) is associated with a Miocene (20.0-19.8 Ma) dioritic complex that was emplaced within the hanging wall of a back thrust fault. The intrusive complex is hosted in quartzites and limestones. The NE-trending deposit is crosscut by NNWtrending prospect-scale faults that influenced both alteration and metal distribution. In the SW and NE of the deposit, potassic alteration zones contain moderate hypogene grades (0.14 g/t Au and 0.8% Cu) and are characterised by chalcopyrite and pyrite mineralisation. The core of the deposit is defined by a lower grade (0.08 g/t Au and 0.57% Cu) phyllic alteration that overprinted early potassic alteration. Michiquillay contains a supergene enrichment blanket of 45-80 m thickness with an average Cu grade of 1.15%, which is overlain by a deep leached cap (up to 150 m). Cu-Au-Mo (El Galeno-Michiquillay) and Au-rich (Minas Conga) deposits in the Cajamarca region are of similar age (early-middle Miocene) and intrusive rock type (dioritic) associations. Despite these geochronological and geochemical similarities, findings from this study suggest variation in metal grade between the hybrid-type and Au-rich deposits result from a combination of physio-chemical factors. These include variations in temperature and oxygen fugacity conditions during hypogene mineralisation resulting in varied sulphide assemblages, host rock type, precipitation of ubiquitous hydrothermal magnetite, and late hydrothermal fluid flow resulting in a well-developed phyllic alteration zone.

The middle to late Miocene Altar porphyry Cu-(Au-Mo) deposit, located in the Andean Main Cordillera of San Juan Province (Argentina), is characterized by the superposition of multiple vein generations consisting of both porphyry-type and high sulfidation epithermal-style alteration and mineralization. We constrain the physical and chemical evolution of the hydrothermal fluids that formed this deposit based on description and distribution of vein types, scanning electron microscopy, cathodoluminescence (CL) imaging, trace elements in quartz veins, and fluid inclusion microthermometry. Quartz CL textures and trace elements (chiefly Li, Al, Ti, and Ge) differentiate among quartz generations precipitated during different mineralization and alteration events. Early quartz ± chalcopyrite ± pyrite veins and quartz ± molybdenite veins (A and B veins) show considerable complexity and were commonly reopened, and some underwent quartz dissolution. Early quartz ± chalcopyrite ± pyrite veins (A veins) are dominated by equigranular bright CL quartz with homogeneous texture. Most of these veins contain higher Ti concentrations than any other vein type (average: 100 ppm) and have low to intermediate Al concentrations (65-448 ppm). Quartz ± molybdenite (B veins) and chlorite + rutile ± hematite (C veins) veins contain quartz of intermediate CL intensity that commonly shows growth zones with oscillatory CL intensity. Quartz from these veins has intermediate Ti concentrations (~20 ppm) and Al concentrations similar to those of A veins. Quartz from later quartz + pyrite veins with quartz + muscovite ± tourmaline halos (D veins) has significantly lower CL intensity, low Ti (<15 ppm) and elevated Al concentrations (up to 1,000 ppm), and typically contains euhedral growth zones. Late veins rich in sulfides and sulfosalts show CL textures typical of epithermal deposits (dark CL quartz, crustiform banding, and euhedral growth zones). Quartz from these veins typically contains less than 5 ppm Ti, and Al, Li, and Ge concentrations are elevated relative to other vein types. Based on experimentally established relationships between Ti concentration in quartz and temperature, the decrease in Ti content in successively later quartz generations indicates that the temperature of the hydrothermal fluids decreased through time during the evolution of the system. Vein formation at Altar occurred at progressively lower pressure, shallower paleodepth, and lower temperature. Under lithostatic pressures, the magma supplied low-salinity aqueous fluids at depths of ~6 to 6.8 km (pressures of 1.6-1.8 kbar) and temperatures of 670° to 730°C (first quartz generation of early quartz ± chalcopyrite ± pyrite veins). This parental fluid episodically depressurized and cooled at temperatures and pressures below the brine-vapor solvus. Quartz ± molybdenite veins precipitated from fluids at temperatures of 510° to 540°C and pressures of 800 to 1,000 bars, corresponding to depths of 3 to 3.7 km under lithostatic pressures. Further cooling of hydrothermal fluids to temperatures between 425° and 370°C under hydrostatic pressures of 200 to 350 bars produced pyrite-quartz veins and pervasive quartz + muscovite ± tourmaline and illite alteration that overprinted the early hydrothermal assemblages. Late veins rich in sulfides and sulfosalts that overlapped the deep and intermediate high-temperature veins formed from fluids at temperatures of 250° to 280°C and pressures of 20 to 150 bars. The epithermal siliceous ledges formed from low-temperature fluids (<230°C) at hydrostatic pressures of <100 bars corresponding to depths of <<1 km.

Economic Geology, 2015

The middle to late Miocene Altar porphyry Cu-(Au-Mo) deposit, located in the Andean Main Cordillera of San Juan Province (Argentina), is characterized by the superposition of multiple vein generations consisting of both porphyry-type and high sulfidation epithermal-style alteration and mineralization. We constrain the physical and chemical evolution of the hydrothermal fluids that formed this deposit based on description and distribution of vein types, scanning electron microscopy, cathodoluminescence (CL) imaging, trace elements in quartz veins, and fluid inclusion microthermometry.

Mineralium Deposita, 2005

Silicate and sulfide melt inclusions from the andesitic Farallo´n Negro Volcanic Complex in NW Argentina were analyzed by laser ablation ICPMS to track the behavior of Cu and Au during magma evolution, and to identify the processes in the source of fluids responsible for porphyry-Cu-Au mineralization at the 600 Mt Bajo de la Alumbrera deposit. The combination of silicate and sulfide melt inclusion data with previously published geological and geochemical information indicates that the source of ore metals and water was a mantle-derived mafic magma that contained approximately 6 wt.% H 2 O and 200 ppm Cu. This magma and a rhyodacitic magma mixed in an upper-crustal magma chamber, feeding the volcanic systems and associated subvolcanic intrusions over 2.6 million years. Generation of the ore fluid from this magma occurred towards the end of this protracted evolution and probably involved six important steps: (1) Generation of a sulfide melt upon magma mixing in some parts of the magma chamber.