ISO/IEC 14443
 |
ISO/IEC 14443 Identification cards – Contactless integrated circuit cards – Proximity cards is an international standard that defines proximity cards used for identification, and the transmission protocols for communicating with it.[1][2][3][4]
Standard
[edit]The standard is developed by ISO/IEC JTC 1 (Joint Technical Committee 1) / SC 17 (Subcommittee 17) / WG 8 (Working Group 8).
Parts
[edit]- ISO/IEC 14443-1:2018 Part 1: Physical characteristic[1]
- ISO/IEC 14443-2:2020 Part 2: Radio frequency power and signal interface[2]
- ISO/IEC 14443-3:2018 Part 3: Initialization and anticollision[3]
- ISO/IEC 14443-4:2018 Part 4: Transmission protocol[4]
Types
[edit]Cards may be Type A and Type B, both of which communicate via radio at 13.56 MHz (RFID HF). The main differences between these types concern modulation methods, coding schemes (Part 2) and protocol initialization procedures (Part 3). Both Type A and Type B cards use the same transmission protocol (described in Part 4). The transmission protocol specifies data block exchange and related mechanisms:
- data block chaining
- waiting time extension
- multi-activation
ISO/IEC 14443 uses the following terms for components:
- PCD: proximity coupling device (the card reader)
- PICC: proximity integrated circuit card
Modulation methods
[edit]Type A cards use amplitude-shift keying (ASK) with Modified Miller coding for reader-to-tag communication. For tag-to-reader communication, they use on-off keying (OOK) with Manchester code.
Type B cards use ASK with NRZ coding for reader-to-tag communication and binary phase-shift keying (BPSK) with NRZ-L encoding for tag-to-reader communication.[5][6]
Both Type A and Type B cards only allow half duplex communication with a 106 kbit per second data rate in each direction. Data transmitted by the card is load modulated with a 847.5 kHz subcarrier.[7] (847.5 kHz is one-sixteenth of the 13.56 carrier frequency provided by the reader.
Physical size
[edit]Part 1 of the standard specifies that the card shall be compliant with ISO/IEC 7810 or ISO/IEC 15457-1, or "an object of any other dimension".[1]
Notable implementations
[edit]- Ventra cards used in bus and trains
- MIFARE cards (partial or full implementation, depending on product)
- Biometric passports
- EMV payment cards (PayPass, Visa payWave, ExpressPay)
- National identity cards in the European Economic Area
- Near Field Communication is based on in part, and is compatible with, ISO/IEC 14443
- Contactless FIDO authenticators use ISO 14443
- Calypso, open security standard for transit fare collection systems
- CIPURSE, open security standard for transit fare collection systems
- Nabaztag:tag uses z:tamp and nano:ztag ISO/IEC 14443 Type B.
See also
[edit]- ISO/IEC 7816, "with contact" smart card standard
- ISO/IEC 15693, another protocol for NFC cards
- ISO/IEC 18000, another protocol for NFC cards
- International Civil Aviation Organization § Standards
- List of ISO standards
- FeliCa
References
[edit]- ^ a b c "ISO/IEC 14443-2:2020". ISO. Retrieved 2018-12-12.
- ^ a b "ISO/IEC 14443-2:2020". ISO. Retrieved 2020-07-12.
- ^ a b "ISO/IEC 14443-3:2018". ISO. Retrieved 2018-12-12.
- ^ a b "ISO/IEC 14443-4:2018". ISO. Retrieved 2018-12-12.
- ^ Fernández-Caramés, Tiago; Fraga-Lamas, Paula; Suárez-Albela, Manuel; Castedo, Luis (24 December 2016). "Reverse Engineering and Security Evaluation of Commercial Tags for RFID-Based IoT Applications". Sensors. 17 (1): 28. arXiv:2402.03591. Bibcode:2016Senso..17...28F. doi:10.3390/s17010028. PMC 5298601. PMID 28029119.
- ^ "device doc (download)". ww1.microchip.com.
- ^ "Active load modulation Finkenzeller (download)". www.rfid-handbook.de.
External links
[edit]- Draft ISO/IEC 14443 standards
- Requirements of ISO/IEC 14443 Type B Proximity Contactless Identification Cards, Application Note, Rev. 2056B–RFID–11/05, Atmel Corporation,
